top of page
Product Introdution
Iron Burn is a very powerful and extremely effective cleaner designed to remove unseen iron deposits from the surface. Iron burn completely exfoliates the surface using a high-tech color changing formula allowing a better bonding topcoat that allows coatings to adhere to the surface properly. Without removing iron contaminants, the coatings will not be able to fully adhere to the surface and will likely cause premature failure. When applied to a vehicle, the clear, acid-free, pH-balanced solution will turn purple upon contact as it chemically dissolves the contamination without any scrubbing or abrasive contact.
How to use
Shake well before using the product.
Apply to a clean, cool surface, out of the sun, at ambient temperature.
Spray evenly on the surface and watch the contaminants melt away.
Thoroughly rinse off with high-pressure water within 2 minutes of application.
Do not let Iron Burn dry.
Full spray down uses ~250ml per vehicle, depending on contamination.
Can also be diluted up to 1:3.
Tips :
Do not leave the product on too long or allow it to dry.
The cleaner may dry faster when the air is dry or the temperature is high.
bottom of page